ΦόρουμΣυχνές ΕρωτήσειςΑναζήτησηΕγγραφήΣύνδεση

Μοιραστείτε | 
 

 Seat Ibiza Fr 150hp Stage 1st - Tuning by mail request

Επισκόπηση προηγούμενης Θ.Ενότητας Επισκόπηση επόμενης Θ.Ενότητας Πήγαινε κάτω 
ΣυγγραφέαςΜήνυμα
James_Fr
Revlimited
Revlimited


Αριθμός μηνυμάτων : 6
Ημερομηνία εγγραφής : 09/09/2009

ΔημοσίευσηΘέμα: Seat Ibiza Fr 150hp Stage 1st - Tuning by mail request   Σαβ Σεπ 26, 2009 7:08 pm

Hello fotis,

I am james_Fr for the chiptuning forum, do you remember me?
I have on my Ibiza Fr a forge IC, 2.5inc exhaust and the forge intake.
I know that this engine can gain more than 240bhp with that KKK03 turbo but the company that chipped my ECU told me that my car cannot get more than 200 - 205bhp.

I am watching you on the forum and you say that you can tune this engine and hit more than 240hp with high octane fuel.

Here in England the best fuel is 98octane but the low temps accept high advance tuning.

Do you think that you can tune my ECU by mail, with 98octane fuel only. What else I need to have to get more than 240bhp?

Best regards
James
Επιστροφή στην κορυφή Πήγαινε κάτω
James_Fr
Revlimited
Revlimited


Αριθμός μηνυμάτων : 6
Ημερομηνία εγγραφής : 09/09/2009

ΔημοσίευσηΘέμα: Απ: Seat Ibiza Fr 150hp Stage 1st - Tuning by mail request   Σαβ Σεπ 26, 2009 7:16 pm

I forgot. I have vag-com 311. So, I can send you logs to help you tune my engine better.
Also I am electronic engineer and I can set a socket on my ECU to avoid solder/desolder many times Wink

Do you want any numbers of my ECU? It has a lot
Επιστροφή στην κορυφή Πήγαινε κάτω
Revlimit
Admin


Αριθμός μηνυμάτων : 324
Ημερομηνία εγγραφής : 30/08/2009
Ηλικία : 29
Τόπος : Patra

ΔημοσίευσηΘέμα: Απ: Seat Ibiza Fr 150hp Stage 1st - Tuning by mail request   Σαβ Σεπ 26, 2009 7:25 pm

Hello James,

of course I remember you. Yes I can tune your engine and you can have more than 240hp but you will some things more.
Using vag com I can tune you you engine with a totally custom way and yes it will help us a lot.

Also you need a 4bar FPR, search for a M&D
Do you have catalyst?

Finaly you must tight the westgate of the Turbo a lot. I will calibrate you the pressure

What pressure are you running now, also make a log on channel 101 and tell me how many your MAF sensor counts in g/sec...

cheers
Fotis
Επιστροφή στην κορυφή Πήγαινε κάτω
http://www.revlimit.gr
James_Fr
Revlimited
Revlimited


Αριθμός μηνυμάτων : 6
Ημερομηνία εγγραφής : 09/09/2009

ΔημοσίευσηΘέμα: Απ: Seat Ibiza Fr 150hp Stage 1st - Tuning by mail request   Κυρ Σεπ 27, 2009 6:00 pm

what problems with 4bar pressure fuel?
If I tight the the westgate actuator I will have very high overboost, am I right?

MAF counts 159 but on high rpm. As I saw it increases from low to high RPM, is it good?

Which type of chip does my ECU has?
Επιστροφή στην κορυφή Πήγαινε κάτω
Revlimit
Admin


Αριθμός μηνυμάτων : 324
Ημερομηνία εγγραφής : 30/08/2009
Ηλικία : 29
Τόπος : Patra

ΔημοσίευσηΘέμα: Απ: Seat Ibiza Fr 150hp Stage 1st - Tuning by mail request   Κυρ Σεπ 27, 2009 11:56 pm

no problems at all. I will calibrated you and you will have very low fuel trims...
Also I will calibrate you the N75 valve and I will control the overboost

Yes MAF counts right.... After remap we will hit over 190g/sec Wink

Your ECU has a PSOP smd 44pin dil chip 29F800BB, it is easy to find it cause there is only one....
buy a socket, read it with your programmer and send it to me by mail...

The ECU numbers are inside the bin that you will mail me Wink

cheers
Fotis
Επιστροφή στην κορυφή Πήγαινε κάτω
http://www.revlimit.gr
James_Fr
Revlimited
Revlimited


Αριθμός μηνυμάτων : 6
Ημερομηνία εγγραφής : 09/09/2009

ΔημοσίευσηΘέμα: Απ: Seat Ibiza Fr 150hp Stage 1st - Tuning by mail request   Πεμ Οκτ 01, 2009 1:11 pm

I have received the socket and I have installed it.
I sent you the ori with mail. I bought an adapter for that chip cause I haven't.

Now I am running at 1.2 overboost and 0.9 constant, as I remember.

Also I get an original bosch 4bar regulator.
My mechanic will tight the westgate 50% for start. Is that ok?
Επιστροφή στην κορυφή Πήγαινε κάτω
Revlimit
Admin


Αριθμός μηνυμάτων : 324
Ημερομηνία εγγραφής : 30/08/2009
Ηλικία : 29
Τόπος : Patra

ΔημοσίευσηΘέμα: Απ: Seat Ibiza Fr 150hp Stage 1st - Tuning by mail request   Πεμ Οκτ 01, 2009 1:23 pm

The rest with e-mail,
or add me on you MSN or Skype

I prefer Skype to have a live talk during logs
If you can find any non cable internet like mine Vodafone, it will help us a lot.

cheers
Fotis
Επιστροφή στην κορυφή Πήγαινε κάτω
http://www.revlimit.gr
James_Fr
Revlimited
Revlimited


Αριθμός μηνυμάτων : 6
Ημερομηνία εγγραφής : 09/09/2009

ΔημοσίευσηΘέμα: Απ: Seat Ibiza Fr 150hp Stage 1st - Tuning by mail request   Τετ Οκτ 07, 2009 9:27 pm

Great job Fotis
193g/sec at air flow cheers

1.55bar over and almost 1bar at 7000RPM

Thank's

I will try to find the intake cam from the NA engine as you suggest me.
Also I bought the Forge WG

I will dyno it soon.

Thank's again...
Επιστροφή στην κορυφή Πήγαινε κάτω
Revlimit
Admin


Αριθμός μηνυμάτων : 324
Ημερομηνία εγγραφής : 30/08/2009
Ηλικία : 29
Τόπος : Patra

ΔημοσίευσηΘέμα: Απ: Seat Ibiza Fr 150hp Stage 1st - Tuning by mail request   Πεμ Οκτ 08, 2009 2:01 am

Wink
With the forge westgate it is possible to have more constant pressure from 4500 - 6500RPM also it is
possible to have 1bar - 1.05 at 7000RPM.

The overboost will stop at 1.5 - 1.55.
1.4 is the perfect boost for a drag setup with Fr's K03 Turbo, but it costs torque.

Add the WG and mail me to finish it.

Also adding the Intake cam for the NA engine will let us play with more aggressive advance timing at higher RPM.

cheers,
Fotis
Επιστροφή στην κορυφή Πήγαινε κάτω
http://www.revlimit.gr
James_Fr
Revlimited
Revlimited


Αριθμός μηνυμάτων : 6
Ημερομηνία εγγραφής : 09/09/2009

ΔημοσίευσηΘέμα: Απ: Seat Ibiza Fr 150hp Stage 1st - Tuning by mail request   Κυρ Οκτ 11, 2009 2:30 pm

I bought the S3 MAF
I am looking for the S3 inj, but it is too dificult to find them. I have found some Bosch 440cc, are they OK?
I have the Forge WG

I need to find the inj and the cam and I will be ready for the last stage of tuning.

If I see over 250bhp is will send you a MOET Very Happy
Επιστροφή στην κορυφή Πήγαινε κάτω
Revlimit
Admin


Αριθμός μηνυμάτων : 324
Ημερομηνία εγγραφής : 30/08/2009
Ηλικία : 29
Τόπος : Patra

ΔημοσίευσηΘέμα: Απ: Seat Ibiza Fr 150hp Stage 1st - Tuning by mail request   Τρι Οκτ 13, 2009 12:09 pm

Add the S3 MAF.
Yes 440cc are ok. Add them with the old 3bar FPR.
Aslo you can add the WG

We 'll tune the software with these and when you will find cam we finish it.

cheers
Fotis
Επιστροφή στην κορυφή Πήγαινε κάτω
http://www.revlimit.gr
 
Seat Ibiza Fr 150hp Stage 1st - Tuning by mail request
Επισκόπηση προηγούμενης Θ.Ενότητας Επισκόπηση επόμενης Θ.Ενότητας Επιστροφή στην κορυφή 
Σελίδα 1 από 1

Δικαιώματα σας στην κατηγορία αυτήΔεν μπορείτε να απαντήσετε στα Θέματα αυτής της Δ.Συζήτησης
Revlimit Forum :: Revlimit Support :: Mobile Tuning-
Μετάβαση σε: